character of reinforced bar forming machine of
1, the rack: the use of high-strength steel and special welding process manufacturing, extremely strong.
2, the guide column: made of super special steel, the surface chrome has a good torsion and wear resistance.
3, mold:Our company can design according to customer requirements mold, the use of high wear-resistant alloy steel, mold with a long time, character bar forming machine, simple processing, easy installation and so on.
4, the drive system: the model using hydraulic drive, double foot switch to complete the double angle bending forming, horizontal from the left and right two hydraulic cylinders synchronous displacement to achieve synchronous bending molding, Dahua narrowing forming error; solenoid valve with Beijing Huade brand ,Stable and reliable
The character of reinforced bar forming machine is mainly used in the construction of the grille arch of the grid, bridge, subway and other construction projects. The grid arch is made up of the main bar, the eight-character bar, the U-shaped steel bar, the bender and the angle steel connecting plate The bar bending machinery
Dimensions (L * W * H): 2700*700*1400mm
1, grid arch installation
(1) option. Select the required unit according to the construction site.
(2) lifting. The selected unit is lifted from the stack with electric machinery to the working surface. This process is concerned with protecting the grille from bending and tearing.
(3) the initial position. Artificially transported to the face of the grille by the position of the first place in place. And the units are bolted. semi automatic bar bending machine Do not twist in order to adjust.
(4) review. Once the grid is in place, check it immediately. The main review center line and elevation, timely adjustment, to achieve the correct meet the design requirements.
(5) positioning check after passing, tighten the connection bolts, and welding with the positioning of a solid.
(6) connection. Grille positioning, the timely welding of longitudinal connecting ribs, and the former a strong welding, grille and anchor connection must meet the requirements.
2, Character of reinforced bar forming machine| tunnel eight character bar machine operation and installation process review, connection for the operating points, it must meet the following requirements:
(1) grille clearance must meet the design requirements, not infringing.
(2) grid elevation must meet the design requirements.
(3) bolts must be tightened.
(4) The connection of the connecting ribs and the connection between the bolts shall comply with the construction codes and regulations bar bending machinery.
(5) accurate review of mileage, to avoid the installation of vertical phenomenon of grid staggered phenomenon.