Electric Hydraulic Pump Single Acting Manual Valve Power Pack 10000 PSI
Single acting electric driven hydraulic pump with a remote solenoid valve.The electric oil pump system is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank. It has the advantages of small volume, small pressure, light weight, simple structure and convenient use. The pump in order to always be able to observe the work of the pressure changes, special equipment gauge pressure gauge standby interface for the user to install the pressure gauge purposes.
Function: Single-acting, manual valve
Standard or Nonstandard:Standard
Oil storage volume of:8L(488in³)
Flow-Hypertension:0.7L/ min(43in³/min);Low-5L/min(305 in³/min)
Rated working pressure -63Mpa,High pressure:70Mpa(10000PSI),Low pressure:2Mpa(300PSI)
How to Work:
1.Open the venting nut, the oil block on the switch to open, plug in the power supply, and quick connector sets in the use of hydraulic equipment on the fast head.
2.Press the power switch, the motor rotation 1-2 minutes, the switch is placed in the supercharged state off, this time the output hydraulic oil will work, the output of hydraulic oil with the load to increase the self-pressurized work until 63MPA .
3.Finally, open the switch unloading, until the end of the hydraulic oil to return, remove the quick connector sets, turn a good air release nut, elect Chennai, close the switch.