Description of Anchor Extruder for Post Tensioning:
Scope of application: Construction, reinforced concrete structure construction, high-rise frame buildings, ordinary highways, highways, ordinary railways, high-speed railways, tunnels, bridges, airport construction, flood control dams, earthquake-resistant buildings, sea breakwater dams and other steel reinforcement applications .
The cold-pressed connection of the steel bar is to insert the steel bar to be connected into the extrusion sleeve, and squeeze the sleeve with a squeeze pincer, so that a joint formed by plastic deformation and the ribbed steel bar surface is pressed closely. Compared with the traditional lap joint and welding technology, this technology has the advantages of stable and reliable joint quality, no environmental impact, and can be constructed throughout the day, and the joints have the advantages of shock resistance, low temperature resistance, and the like. The extrusion equipment produced by our factory consists of ultra-high pressure pump station, high-pressure oil pipe and squeeze pliers, and compression die, which together complete the extrusion connection.
Product features: Compact structure, easy to use, light weight, easy to move, simple operation, high pressure and low pressure bipolar design, ultra-high pressure main pump station, adjustable pressure stroke stroke, flexible use in various complicated environments.
Parameters of Anchor Extruder for Post Tensioning:
According to the diameter of steel stranded wire can be divided into YM12.7, YM13, YM18 type anchorage, the anchoring system is mainly applicable to the strength of 1860MPA-2000Mpa and below the level of 12.7mm, 12.9mm, 15.24mm, 15.7mm, and 17.8mm as the standard strength of steel strand of 5mm-7mm high strength steel beam 1670Mpa. Wide range of options, YM is suitable for design of Swage Anchor Extruder system between 0-12000KN, the number of steel strand range is 55;
Anchor end extruder Including the M series steel wire tension and anchor system: M13 (anchorage for 12.7-12.9mm steel strand and anchorage (M15) used in 15.2-15.7mm steel wire) with YCW series Jack and ZB4-500 type electric pump for tension; for flat structure BM13 and BM15 flat anchorage for cyclic stress; the structure of the HM13 and HM15 ring anchor.