Portable Floor Scabbler|Pneumatic|multi-headed

Portable Floor Scabbler|Pneumatic|multi-headed

Description of Hand-held floor scabbler : Parameters of Hand-held floor scabbler : Operating instruction of Hand-held floor scabbler : Air Supply The compressed air must be free from water and dirt. The installation of a filter/regulator/lubricator air preparation set (with moisture trap)...
Chat Now

Product Details

Description of Hand-held floor scabbler:

hand-held floor scabbler-01.jpg    hand-held floor scabbler-02


Parameters of Hand-held floor scabbler:


Hand-held floor scabbler-03


Operating instruction of Hand-held floor scabbler:

Air Supply

The compressed air must be free from water and dirt. The installation of a filter/regulator/lubricator air preparation set (with moisture trap) adjacent to the tool is strongly recommended.

Always clear the air hose before connection to the tool. Ensure that no moisture (condensation) is present in the air hose. 


Ensure that a minimum 10mm (3/8”) bore air hose is used and that all couplings are secure, leak free and in good condition.


Limit the length of air hose to 10M (33ft). Where extra length is necessary, for each additional 15M (50ft) of air hose used, the pressure drop is approximately 0.16bar (3psi). 


Correct operating pressure is 6.2bar (90 psi).


Do not let the operating pressure fall below 5.5bar (80p.s.i.) or rise above 6.9bar (100 psi) absolute maximum.


The compressor must be able to supply a minimum of 14.2lps (30cfm), (Free air, not displaced as quoted by some compressor manufactures).


In particularly cold weather it is recommended that a proprietary anti -freeze lubricating oil is used.


Safety

Always, read instructions first before use.


Do wear Personal Protective Equipment including safety goggles, footwear, ear defenders and gloves. In some environments it will be necessary to wear facemasks or breathing apparatus. 


Do be aware that this tool is not electrically insulated. Do keep hands and clothing away from moving parts. 

Do ensure that this tool is lubricated daily. 


Do be aware that the tool can create dust and flying debris. 


Do be aware of others working around you. Do store this tool in a secure and dry environment. Always observe safe-working practices at all times. 


Do not allow the tool to run unattended. 


Do not use this tool in potentially explosive environments. 


Do not drag this tool by the air hose. Do not use the Scaler as a lever. 


Do not use petrol (gasoline), thinners or any other high flash point solvent to clean the tool. 


Do not modify this tool in any way, as this will invalidate the warranty and could lead to serious injury. 

Inquiry