China Ultra-large Rock Splitters Manufacturers|used For A Large Area Of Rock Split Construction

China Ultra-large Rock Splitters Manufacturers|used For A Large Area Of Rock Split Construction

ultra-large rock splitters with splitting force
1 airborne division force is huge, 3500-5800 tons
2 has the advantages of simple structure, convenient operation, high work efficiency
3 low cost, safety, energy saving, a series of advantages of energy saving management.
To improve the service quality of customer service, enhance customer satisfaction

Product Details

China Ultra-large rock splitters manufacturers|used for a large area of rock split construction

Product description of ultra-large rock splitters:
Explosives or large rock breakers are the normal methods for excavation of hard rock. But restrictions on blasting are getting stricter and the use of rock breakers is not always feasible due to vibrations, noise restrictions or simply to hard rock. Ultra-large rock splitters offer an alternative method for efficient excavation of large volumes of hard rock without the need for explosives, vibrations or fly rock. The splitter can be mounted from a crane or a normal excavator for open pits or shafts, or mounted on a specialised carrier for horizontal tunnelling. For large volumes of rock, there is simply no mechanical method more efficient, safe and silent than the Yamamoto rock splitter. 


ultra large rock splitter-05


ultra-large rock splitters-44.jpg      ultra-large rock splitters-44.jpgultra rock splitter-44

Airborne splitting machine in use Note:

For your better use of our ultra large rock splitters quarry to avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:

1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division.

(Hole depth requirements: splitter front end of the block length + 900mm or more, for example: split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)

2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter.

3. Do not use the splitter gun as a crowbar to use!

Airborne splitting machine in use Note:

For your better use of our ultra large rock splitters quarry to avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:

1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division.

(Hole depth requirements: splitter front end of the block length + 900mm or more, for example: split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)

2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter.

3. Do not use the splitter gun as a crowbar to use!


Inquiry