BW150 Mud Pump For Well Drilling

Features of BW150 mud pump for well drilling:
1 three-cylinder reciprocating single-acting piston pump, can change eight different pressure and flow.
2 pumps consume less energy, flexible operation, high quality and durable.
3 good decomposition, easy to move.
Chat Now

Product Details

Description of BW150 mud pump for well drilling:

Mud pumps are typically positive displacement pumps, otherwise known as reciprocating pumps. Positive displacement pumps are able to provide a constant flow rate of fluid regardless of the pump's outlet pressure. Duplex, triplex, and quintuplex pumps are all used as drilling mud pumps.

Mud pump packages are driven either by an engine or motor. Depending on fuel and energy available on or near a drilling rig, electric motors or diesel engine are common. In some cases, natural gas or other fuel types may be used. Drilling mud pumps are packaged on skid type units which allow for easy removal and transportation from site to site. Other methods are available but are less common.

A mud pump system generally includes a charge pump. Due to the high viscosity fluid, additional pressure is commonly needed on the inlet to the mud pump to prevent cavitation.

Parameters of BW150 mud pump for well drilling:

Maximum flow rate      150L/min
The maximum pressure       70kg/cm2
Drive power      7.5kw
The diameter of the suction pipe      50mm
Drain pipe diameter      32mm
Weight      560kg

Before starting the mud pump, check whether there is any clogging in the inlet pipe and outlet pipe, and whether the front and rear bearings are filled with butter and check whether the packing is full. Mud pumps should be equipped with a high-pressure clean water pump to send clean water that is greater than the mud pump pressure to the leak-proof packing to protect the packing. When the mud pump is working, the flush pump must not be turned off. Otherwise, the seal part will be quickly worn. Whether the clearance between the impeller and the guard plate is reasonable has a great influence on the life of the mud pump. If the clearance is not reasonable, the vibration and noise will be generated when the pump is running, and the over-current components will be damaged quickly. Therefore, when replacing the impeller, attention should be paid to make the clearance meet the requirements of the drawings, and the gap adjustment can be performed through the adjustment screws on the rear bearing body. The allowable suction stroke of the mud pump is determined when the clean water is conveyed, and the effect of the mud on the sucking ability should be taken into account when pumping the mud.

BW150 mud pump

BW150 mud pump

You are buying = Our Products + Our Service :

1,Quality is our culture ,strict QC/QA systems under GMP factory.

2,Fast and safe delivery with secure and discreet shipment.

3,With us, your money is in safe as well as your business.It's our promise to you!

4,For whatever questions about us or our products you may have, do let us know and you can be assured we reply you in details with 24 hours and to your satisfaction.

5,Warmly welcome your visit in our company if available.


  1. Q: Are you trading company or manufacturer?

    A: We are original equipment manufacturer.

2. Q: How long is your delivery time?

    A: It is according to the model and quantity.

        Generally it is 3-5 days if the machines are in stock.

        It will be 15-30 days if you want to customize the machines.

3. Q: Do you provide samples? Is it free or extra?

    A: Yes, we could offer you the sample machine.

        But it's not free. You need to pay for the sample and the cost of freight.

4. Q: What is your terms of payment?

    A: We accept T/T, Western Union, Money Gram, Paypal, Alibaba Escrow etc.

        Payment<=USD 5000, 100% in advance.

        Payment>=USD 5000, 30% T/T in advance, balance before shipment