Description of ceramic piston pump:
YB series hydraulic ceramic piston pump is worked by ceramic plunger, which is hydraulic driven on Single and double cylinder. The pump has a smooth operation, low noise, high pressure, pressure fluctuations, small size, light weight. Installation and maintenance easy operation, long life and other characteristics. Mainly used for various types of pressure Filter for slurry, can also be used long-distance transmission for slurry,clean (sewage) water, coal slurry (or other suspension).
YB series Ceramic hydraulic piston pump are driven by hydraulic pressure. The plunger is made of wear resistant and corrosion resistant alumina ceramics. Pump body according to the ceramic industry, chemical industry and other characteristics of the requirements, can be made into cast iron, stainless steel and so on.
Sludge piston pump can be divided into high pressure pump, low pressure high flow pump and variable pump. High pressure pump is suitable for long distance or to high-altitude conveying slurry; low pressure large flow pump is suitable for stable large conveying slurry; variable pump is suitable for supporting the filter device and all kinds of filter press, use the pump as the filter density increases the pressure increased automatically, reduce traffic.
Application of ceramic plunger mud pump:
YB series piston pumps are mainly used in ceramic slurry transportation, coal water slurry transportation, kaolin and non-metallic ore suspension transportation. It can also be used in the transportation of food suspension, chemical pulp, electronic paste, magnetic material and so on. It can transport solid content more than 70% concentrated suspension characteristics, so that it is in use with spray drying tower, filter press and other drying equipment matching, has a high working efficiency and energy efficiency.
Notice of slip pumps with ceramic piston:
1, flush the valve box and replace each part, don't press the fixed rod too tightly, don't leak the pulp;
2, remove the right cylinder to replace the piston pin, should pay attention to knock pin must avoid the cylinder bottom cover gap (oil channel mouth), otherwise, can not fill the oil, so that the piston can not be reversed;
3, the fuel tank should always be clean, not flush with the lid and the integrated block;
4, the hydraulic oil to maintain absolute cleanliness, must regularly check the quality of the oil;
5, after adjusting the pressure of the pump, generally do not adjust the relief valve, otherwise the original system chaos, prone to failure;
6, abnormal sound, should immediately shut down, check the fault source, repair.